After using the plate heat exchanger for a long time, there will be some problems. Some users recently reported that they encountered equipment leakage when using the plate heat exchanger. Next, we introduce the leakage of the plate heat exchanger What are the reasons and solutions for equipment leakage?
1. In the state without pressure, we need to readjust the size of the plate heat exchanger to a uniform state. Everyone must adjust it according to the size provided by the manufacturer.
2. Mark the places where leakage occurs in the plate heat exchanger, and then overhaul the equipment as a whole, especially the gaskets of the equipment, because these places are likely to be the key points that cause leakage.
3. After disassembling the plate heat exchanger, if it is found that the external leakage caused by the deformation of the plate is in place, it can be replaced in time.
These reasons analyzed above may be the cause of equipment leakage. If you encounter such problems during actual use, you must deal with them in a timely manner.