足球波胆预测

Plate heat exchanger to plate thickness standard

hit count: Updated: 19/09/12 14:29:09 Source: coinaccel.com [ close ] share:
    The thickness of the plate heat exchanger is basically between 0.4mm-0.8mm. The thickness of the plate is mainly determined by the working pressure. The higher the working pressure is, the thicker the plate is, and the production cost is. The higher it will be, the lower it will be the lower. Users need to decide according to their actual requirements. Basically, there are more plates with 0.5mm and 0.6mm.
    The design of most plates is to facilitate the bonding of the gaskets. Therefore, the smooth surface design is used at the joint between the plates and the gaskets. The design of such smooth surface grooves is often caused by the user's If you do not understand the heat exchanger, the entire equipment will be scrapped due to the imbalance in the use of power during maintenance, which will cause the plate to be damaged. Therefore, you must be extra careful when you smooth the groove on WeChat.
    1. When purchasing plate heat exchangers or gaskets for the first time, be sure to choose the right one with high quality.
    2. Check whether there is a filter at the inlet of the plate heat exchanger.
    3. Whether the water tower on the cooling water side is cleaned regularly (the so-called cleaning is only discharged within a fixed period of time, use simple tools to clean up the dirt in the water tower, do not use chemical agents to pour directly into the direct cleaning).
    contact us
    Contact: Zibo Taylor Heat Exchange Equipment Co., Ltd.
    Mobile: 13573335466
    Phone / Fax: 0533-4262767
    Email: 2313096826@qq.com
    Address: Fushan Industrial Park, Boshan District, Zibo City, Shandong Province